The K-Series Programmable ECU (K-Pro) consists of a hardware modification to any K-Series ECU (Not Included) , plus Windows software which allows you to re-program the ECU and datalog sensors.

Warning : within the USA this product is legal only for racing vehicles which may never be used upon a public highway.

Main features:

• Fits inside the ECU

• Designed and assembled in USA

• USB connection for speed and compatibility

• KManager Windows based software for parameter & table editing, calibration uploading and datalogging.

• Many built in calibrations for common engine combinations

• Built in datalogging to a laptop

• On board datalogging memory (8 MB memory, 10-215 minutes datalogging)

• Adjustment for different sized injectors, with overall fuel trim.

• Configurable for any MAP sensor (to 5 Bar and above)

• TPS based table lookup for ITBs

• Engine protection from lean air fuel ratios, over boost and low oil/fuel pressure.

• Expanded fuel and ignition tables, both in rpm and load, to 60 lbs boost and 11,000 rpm (these are not the upper limits)

• Launch control with anti-lag

• Three multi purpose outputs for nitrous control or similar.

• Supports lambda tracing from the stock wideband o2 or aftermarket wideband.

• PWM output for boost control

• Bluetooth support and Hondata Mobile app.

• Ethanol sensor input for flex fuel capability.

• Alternate speed sensor input.

• Dash output serial & CAN streams.

• Live tuning and auto tune.

KManager editing software features:

• High and low speed 16 x 20 ignition and fuel tables at multiple cam angles for correct VTEC and VTC tuning.

• Injector size fuel trim

• Fuel trim for starting, throttle tip in and individual cylinder trim

• Rev limiter with fuel cut

• Launch control with anti-lag

• Adjustable VTEC window with load and throttle control

• Adjustable idle speed

• MAP sensor type and calibration

• Adjustable boost cut with hot and cold settings

• Closed loop control

• Air temperature compensation

• Fuel and ignition correction based on gear

• Closed loop

• Three general purpose outputs for nitrous control, quad boost control or similar

• On board datalogging trigger conditions

This product can only be used with the following ECU's :

• PRB (A01-A12 & 305)

• PND (A01-A09)

• PNF

• PRA

• PRC

• PRD

• PPA

For use in 02-04 Acura RSX Manual models, 02-05 Civic Si and also K-Swap Vehicles.

Please contact us with any questions.